McDATA OPENconnectors Command Line Interace Manual do Utilizador descarregar pdf (Página 119)

100

101

CLI Commands

2-75

config

Purpose This command sets the status of limited fabric RSCNs. When enabled,

fabric register for state change notifications (RSCNs) are suppressed

during an IPL.

Parameters This command has one parameter.

Command Example

Root> config switch ltdFabRSCN 1

config.switch.prefDomainId

Syntax prefDomainId domainId

Purpose This command sets the preferred domain ID for the switch. The

switch must be offline to complete this command.

NOTE: The switch must be set offline before this command is entered.

Parameters This command has one parameter.

Command Example

Root> config switch prefDomainId 1

config.switch.priority

Syntax priority Priority

Purpose This command sets the switch priority.

NOTE: The switch must be set offline before this command is entered.

ltdFabRSCNState Specifies whether the limited fabric RSCN state

is enabled. Valid values are enable and disable.

Boolean 1 and 0 may be substituted as values.

domainId Specifies the new preferred domain ID value.

This parameter must be an integer in the range

1–31.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 327 328

Comentários a estes Manuais

Sem comentários

McDATA OPENconnectors Command Line Interace Manual do Utilizador Página 119

Comentários a estes Manuais

Manuais e produtos relacionados com Redes McDATA OPENconnectors Command Line Interace