McDATA OPENconnectors Command Line Interace Manual do Utilizador descarregar pdf (Página 140)

100

101

2-96

E/OS Command Line Interface User Manual

config

Purpose This command sets the version of the Fibre Alliance MIB with which

the SNMP agent interacts. The version number can be set to 3.0 or 3.1.

Parameters This command has one parameter:

Command Example

Root> config snmp setFaMibVersion 3.1

config.snmp.setState

Syntax setState enabledState

Purpose This command enables or disables the SNMP agent. When disabled,

the SNMP agent does not respond to any requests or send any traps.

Parameters This command has one parameter:

Command Example

Root> config snmp setState 1

config.snmp.show

Syntax show

Purpose This command shows the SNMP configuration of the switch.

Parameters This command has no parameters.

Command Example

Root> config snmp show

Output The switch configuration data is displayed as a table that includes the

following properties:

versionNumber Sets the version of the Fibre Alliance MIB version

number. Accepted values for this command are 3.0 or

3.1.

enabledState Sets the state of the SNMP agent. This parameter

can be set to enable or disable. Boolean 1 and 0 values

may also be substituted.

SNMP Agent State The state of the SNMP agent. If it is disabled, the

SNMP agent does not respond to any requests and

does not produce any traps.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 405 406

Comentários a estes Manuais

Sem comentários

McDATA OPENconnectors Command Line Interace Manual do Utilizador Página 140

Comentários a estes Manuais

Manuais e produtos relacionados com Redes McDATA OPENconnectors Command Line Interace